39
Slide the screw with the threaded parts through the top hole found in the glass door from the inside of the
door facing out. Ensure the metal cone has the smaller opening facing the door.
Add one plastic washer to the end of the screw now showing on the outside of the door. Place the remaining
metal washer onto the screw with the flat side against the plastic washer. Repeat for the bottom hole.
Place the outside portion of the door handle (the one without hex screw holes) on the end of the screws so
the handle fits into the recessed portion of the metal washer. Hand tighten the screws to connect the
assembly to the handle. Once both the top and the bottom screws have been hand tightened, a screwdriver
can be used to secure the handle. Use caution when tightening the screw to avoid causing damage to the
door.
