Rockwell RK2515K2, Руководство пользователя, Страница: 7 / 28

12V 3IN1 DRILL / SCREWDRIVER / IMPACT DRIVER ENG
7
c) When battery pack is not in use, keep it away
from other metal objects, like paper clips, coins,
keys, nails, screws or other small metal objects,
that can make a connection from one terminal to
another.
shorting the battery terminals together may
cause burns or a fire.
d) under abusive conditions, liquid may be ejected
from the battery; avoid contact. If contact
accidentally occurs, flush with water. If liquid
contacts eyes, additionally seek medical help.
Liquid ejected from the battery may cause irritation or
burns.
6. SERVICE
a) Have your power tool serviced by a qualified
repair person using only identical replacement
parts.
This will ensure that the safety of the power tool
is maintained.
WARNING: Some dust created by power
sanding, sawing, grinding, drilling and other
construction activities contains chemicals known to
the state of California to cause cancer, birth defects
or other reproductive harm.
some examples of these
chemicals are:
• Lead from lead-based paints;
• Crystalline silica from bricks and cement and other
masonry products and
• Arsenic and chromium from chemically-treated lumber.
your risk from these exposures varies, depending on how
often you do this type of work. To reduce your exposure
to these chemical: work in a well ventilated area, and
work with approved safety equipment, such as those dust
masks that are specially designed to filter out microscopic
particles.
ADDITIoNAL SAFETY RuLES FoR
YouR CoRDLESS IMPACT DRIVER
WARNING: Failure to follow these rules may
result in serious personal injury.
1) Hold power tool by insulated gripping surfaces,
when performing an operation where the
fastener may contact hidden wiring.
Fasteners
contacting a “live” wire may make exposed metal parts
of the power tool “live” and could give the operator an
electric shock.
2) Wear ear protection.
Exposure to noise can cause
hearing loss.
3) Be aware that this tool is always in an operating
condition because it does not have to be plugged
into an electrical outlet.
4) Always hold the tool with both hands.
if the bit
jams, two hands will give you maximum control over
torque reaction or kickback.
5) Disconnect battery pack from the tool or place
switch in the “LoCKED” or “oFF” position before
making any assembly, adjustments or changing
accessories.
such preventive safety measures reduce
the risk of starting the tool accidentally.
6) Secure material before driving.
Never hold it in your
hand or across your legs.
7) Always wear eye protection when using tool. use
a dust mask or respirator for applications which
generate dust.
8) Always check walls and ceiling to avoid hidden
power cables and pipes.
9) use clamps or a vise to hold work-piece
whenever possible.
10) Save these instructions.
Refer to them frequently
and use them to instruct others who may use this tool. if
someone borrows this tool, make sure they have these
instructions.