Rockwell RK2515K2, Руководство пользователя, Страница: 6 / 28

12V 3IN1 DRILL / SCREWDRIVER / IMPACT DRIVER ENG
6
Keep cord away from heat, oil, sharp edges or
moving parts.
damaged or entangled cords increase
the risk of electric shock.
e) When operating a power tool outdoors, use an
extension cord suitable for outdoor use marked
“W-A” or “W”.
use of a cord suitable for outdoor use
reduces the risk of electric shock.
f) If operating a power tool in a damp location
is unavoidable, use a Ground Fault Circuit
Interupter (GFCI) protected supply.
use of a GFCi
reduces the risk of electric shock.
3. PERSoNAL SAFETY
a)
Stay alert, watch what you are doing and use
common sense when operating a power tool. Do
not use a power tool while you are tired or under
the influence of drugs, alcohol or medication.
a
moment of inattention while operating power tools may
result in serious personal injury.
b) use personal protective equipment. Always
wear eye protection.
Protective equipment such as
dust mask, non-skid safety shoes, hard hat, or hearing
protection used for appropriate conditions will reduce
personal injuries.
c) Prevent unintentional starting. Ensure the
switch is in the off-position before connecting
to power source and/or battery pack, picking up
or carrying the tool.
Carrying power tools with your
finger on the switch or energizing power tools that have
the switch on invites accidents.
d) Remove any adjusting key or wrench before
turning the power tool on.
a wrench or a key left
attached to a rotating part of the power tool may result
in personal injury.
e) Do not overreach. Keep proper footing and
balance
at all times.
This enables better control of
the power tool in unexpected situations.
f) Dress properly. Do not wear loose clothing or
jewellery. Keep your hair, clothing and gloves
away from moving parts
. Loose clothes, jewellery or
long hair can be caught in moving parts.
g) If devices are provided for the connection of dust
extraction and collection facilities, ensure these
are connected and properly used.
use of dust
collection can reduce dust-related hazards.
4. PoWER TooL uSE AND CARE
a) Do not force the power tool. use the correct
power tool for your application.
The correct power
tool will do the job better and safer at the rate for which
it was designed.
b) Do not use the power tool if the switch does not
turn it on and off.
any power tool that cannot be
controlled with the switch is dangerous and must be
repaired.
c) Disconnect the plug from the power source and/
or the battery pack from the power tool before
making any adjustments, changing accessories,
or storing power tools.
such preventive safety
measures reduce the risk of starting the power tool
accidentally.
d) Store idle power tools out of the reach of
children and do not allow persons unfamiliar
with the power tool or these instructions to
operate the power tool.
Power tools are dangerous in
the hands of untrained users.
e) Maintain power tools. Check for misalignment or
binding of moving parts, breakage of parts and
any other condition that may affect the power
tool’s operation. If damaged, have the power tool
repaired before use.
Many accidents are caused by
poorly maintained power tools.
f) Keep cutting tools sharp and clean.
Properly
maintained cutting tools with sharp cutting edges are
less likely to bind and are easier to control.
g) use the power tool, accessories and tool bits
etc., in accordance with these instructions and
in the manner intended for the particular type
of power tool, taking into account the working
conditions and the work to be performed.
use
of the power tool for operations different from those
intended could result in a hazardous situation.
h)
use clamps or another practical way to secure and
support the workpiece to a stable platform.
i)
holding the work by hand or against your body leaves it
unstable and may lead to loss of control.
5. BATTERY TooL uSE AND CARE
a)
Recharge only with the charger specified by the
manufacturer.
a charger that is suitable for one type
of battery pack may create a risk of fire when used with
another battery pack.
b) use power tools only with specifically
designated battery packs.
use of any other battery
packs may create a risk of injury and fire.