Rockwell Automation Publication 6300M-UM001A-EN-P - December 2021
31
Chapter
4
Clean the Monitor
For optimal performance, it is important to clean the VersaView® 6300M
monitors periodically.
Clean the Display
Perform the following steps to clean the monitor display.
1. Disconnect power from the monitor at the power source.
2. To clean the display, use a clean sponge or a soft, damp cloth with one of
the acceptable chemicals in
.
3. Dry the display with a chamois or moist cellulose sponge to avoid water
spots.
Clean Monitor Labels
The following chemicals are acceptable (up to four hours of contact except for
water) to clean any monitor labels.
Clean All Vent Holes
Perform the following steps to clean all VersaView 6300M monitors.
1. Disconnect power from the monitor at the power source.
2. Disconnect all peripheral devices from the monitor.
3. Vacuum dust and debris from all vent holes on the display and monitor
chassis.
ATTENTION:
Since the display is a touch screen, it is possible for screen
objects to activate during equipment washdowns if the monitor is turned
on.
ATTENTION:
Use of abrasive cleansers, solvents, and high-pressure
washes can damage the display surface. Do not scrub or use brushes.
•
Acetone
•
Formula 409
•
pH 4
•
Brake fluid
•
Gasoline
•
pH 10
•
Detergent
(1)
(1) 1% Alconox powdered cleaner.
•
Hydraulic fluid
•
Toluene
•
Diesel fuel
•
Isopropyl alcohol
•
Water
(2)
(2) Up to 48 hours of contact.
•
Engine oil
(3)
(3) 10W30 at 121 °C (250 °F).
•
Mineral spirits
