Rockwell Automation Publication 6300M-UM001A-EN-P - December 2021
27
Chapter 3 Configure the Display
4. Press and hold a finger in the center of the red circle.
Keep your finger pressed until the counter reaches 100.
5. Repeat
step 4
for the other three red circles as they appear in each corner
of the screen.
6. A confirmation box appears when the calibration is complete. Click OK.
7. On Tools, press Draw Test.
8. With your finger, draw on the screen to verify that the touch screen is
calibrated correctly.
9. Press Clear to delete what you drew.
10. Press Quit when you are done.
11. On Tools, press Apply to save your changes.
12. Press OK to close the eGalax Touch software.