28
Rockwell Automation Publication 6300M-UM001A-EN-P - December 2021
Chapter 3 Configure the Display
Light-emitting Diode and
Button Descriptions
After a VersaView 6300M panel monitor is powered on, various light-emitting
diodes (LEDs) monitor its state. Use these LEDs to determine if they are lit and
what color they emit.
There are also buttons on the monitor to reset any states that are monitored by
the LEDs.
The following tables detail what LEDs and buttons are on 6300M monitors.
Table 6 - LEDs and Buttons On All Panel Monitors
Table 7 - Remote Video Link (RVL) LEDs on Long Distance Panel Monitors
OSD Menu
Press the menu/select button to access the OSD menu, which has six tabs.
Brightness/Contrast
The brightness/contrast is the first selection with the following choices.
1
2
3
4
5
1
No.
Description
Color
Function
1
Video signal LED
Green
Correct video signal input.
Yellow
No video signal.
2
+ (<—)
—
Increase the value of the selected control or selects the next menu item.
3
– (—>)
Decreases the value of the selected menu item or selects the previous menu item.
4
Menu/select
• Push to enter the main menu; see
• Push to select a highlighted menu option, which can prompt a submenu
• Push to exit from current menu (back option)
5
ESC (Exit)
Exits the menu.
Front Bezel
Monitor Chassis
2
3
4
1
No.
Description
Color
Function
1
Link
Green
The monitor is linked to a remote, RVL capable computer.
2
Video
Flashing yellow The monitor is receiving streaming video from the remote computer.
3
Run
Flashing green
The remote computer is operating correctly.
4
Power
Green
The monitor RVL port is operating correctly.
Monitor Chassis
Item
Description
Brightness
Adjust the brightness of the monitor from 1 to 100.
Contrast
Adjust the contrast of the monitor from 1 to 100.
DCR
Dynamic contrast ratio; turn on or off.