Rockwell Automation Allen-Bradley PowerFlex 23PFC Скачать руководство пользователя страница 73

Страница: 73 / 78

Rockwell Automation Publication 20P-TD001K-EN-P - January 2021

PowerFlex DC Drive and Field Controller Technical Data

PowerFlex DC Field Controller Specifications

Category

Specification

Agency Certification

c-UL-us

Listed to UL508C and CAN/CSA C22.2 No. 14-05.

In conformity with the following European Directives:

• EMC Directive (2004/108/EC)

• Low Voltage Directive (2006/95/EC)

Standards applied:

• EN 50178

• EN 61800-3

RCM

Certified by Rockwell Automation to be in conformity with the requirements of the applicable Australian legislation and the

standards referenced: IEC 61800-3.

Korean KC

Registration

MSIP-REM-RAA-20P
See the certificate of registration for specific drive catalog numbers that have this certification.

(1)

(1) See the product certifications website,

http://www.rockwellautomation.com/rockwellautomation/certification/overview.page

for declarations of conformity, certificates, and other

certification details.

The drive is also designed to meet the following specifications:

NFPA 70 - US National Electrical Code

Category

Specification

Drive Type

Full Wave Regen, 6 Pulse, Regulated Field Supply

Protection

Heat sink Thermistor:

Monitored by microprocessor overtemp trip

Drive Overcurrent Trip

Programmable, 0…250% of rated current (175% default)

Line transients

Up to 2,000 volts peak per IEC 6100-4-5

Control Logic Noise Immunity

Showering arc transients up to 1500V peak

Power Ride-Thru

15 milliseconds at full load

Logic Control Ride-Thru

0.5 seconds minimum, 2 seconds typical

Environment

(1)

(1) Field controllers must be installed in a Pollution Degree 2 environment.

(2) 115V AC input control power requires a jumper between terminals SA and SB for frame B field controllers only. For more information, see

PowerFlex DC Drives and Field Controller Control

Circuit Input Power on page 36

Altitude:

1000 m (3300 ft) max. without derating.

De-rate output power by 1.2% for every 100 meters (328 ft) above 1000 meters (3300 ft).

Maximum Surrounding Air

Temperature IP20, NEMA Type

Open:

0…50 °C (32…122 °F), typical.

De-rate 1.25% for every 1 °C over 50 °C (122 °F), to 55 °C (131 °F).

More cooling is required for temps. above 55 °C.

Storage Temp. (all const.)

–25…+55 °C (–13…+131 °F)

Atmosphere

Important:

The field controller

must

not

be installed in an area where the ambient atmosphere contains

volatile or corrosive gas, vapors, or dust. If the drive is not going to be immediately installed, it must be stored

in an area where it is not exposed to a corrosive atmosphere.

Relative Humidity

Operating: 5…85% noncondensing

Storage: 5…95% noncondensing

Shock

15G peak for 11 ms duration (°1.0 ms)

Vibration

0.152 mm (0.006 in.) displacement, 1G peak

Electrical

Input Voltages:

Control: 115V AC or 230V AC +/- 15%, 1 Phase

(For details, see

AC Input Voltages on page 24

Input Frequency:

50/60 Hz +/- 5%

Max. Rate of Change of Input

Frequency:

2 Hz/s

Output Current:

17…570 A

Drive Overload Capability:

100% rated continuous current

Field Output Voltage

Maximum field output voltage is 1.16 x AC input line voltage.

Max. Short Circuit Rating:

100,000 A

Содержание Allen-Bradley PowerFlex 23PFC















































































Результаты поиска

Содержание Allen-Bradley PowerFlex 23PFC

Отзывы:

Rockwell Automation Allen-Bradley PowerFlex 23PFC, Инструкция по эксплуатации, Страница: 73 / 78

Результаты поиска

Содержание Allen-Bradley PowerFlex 23PFC

Отзывы: