Rockwell Automation Allen-Bradley PowerFlex 23PFC Скачать руководство пользователя страница 30 | Manualshive

Страница: 30 / 78

Rockwell Automation Allen-Bradley PowerFlex 23PFC Скачать руководство пользователя страница 30

30

Rockwell Automation Publication 20P-TD001K-EN-P - January 2021

PowerFlex DC Drive and Field Controller Technical Data

PowerFlex Field Controller Power Wiring Diagram Notes

1. For frame B field controllers only, a jumper is required between terminals SA and SB for 115V AC control input power. For more

information, see

PowerFlex Field Controllers Power Wiring on page 24

.

2. An isolation transformer and/or 3…5% impedance line reactor is required. If the isolation transformer provides the required 3…5%

impedance, a line reactor is not required. For recommendations, see

PowerFlex DC Field Controller AC Input Line Reactors and AC

Contactors on page 16

. It is recommended that the isolation transformer has a grounded wye secondary neutral. If the PowerFlex DC

field controller is installed in a system with an impedance ground connection, see Grounding for Installations in a Neutral Ground or

High Impedance System in the PowerFlex DC Field Controller Installation Instructions, publication

.

3. AC input fuses (FS1) for the field converter are not provided with field controllers. For fuse recommendations, see

Field Controller

Frames A and B AC Input Line Fuses on page 51

.

4. Par 140 [Digital In8 Sel] set to 31 “Contactor.”
5. If the +24V internal power supply is used, terminal 18 (24V common) must be jumpered to terminal 35 (digital input common).
6. Par 1391 [ContactorControl] = 1 “AC Cntctr” and Par 1392 [Relay Out 1 Sel] = 25 “Contactor”. Important: Terminals 35 and 36 are on the

Control Power/Relay Outputs Terminal block, NOT the I/O terminal blocks. See

Frames A and B Contact Relay and Thermistor Terminal

Block Locations on page 41

.

7. For frames B field controllers only, a pilot relay is required for the contactor coil.

PowerFlex DC Drives Terminal Block Locations

Frame A Armature Terminal Block Locations

Frame B Armature Terminal Block Locations

ATTENTION:

Do not operate the drive with the power terminal cover removed. Operating the drive with the power terminal

cover removed can result in a hazardous condition that can cause personal injury and/or equipment damage.

Bottom View

Front View

Front view of drive is shown with bottom protective and power terminal covers removed.

Loosen the two screws that secure the power terminal cover to the drive chassis.
Remove the power terminal cover to connect the armature power wiring.

PE

U

C

V

D

W

PE

U

C

V

D

W

«
...
28
29
30
31
32
...
»

Содержание Allen-Bradley PowerFlex 23PFC















































































Отзывы:

Нет отзывов