manualshive.com logo in svg

Rockwell Automation Allen-Bradley PowerFlex 23PFC, Инструкция по эксплуатации, Страница: 70 / 78

Поделиться
Скачать
Rockwell Automation Allen-Bradley PowerFlex 23PFC Скачать руководство пользователя страница 70

70

Rockwell Automation Publication 20P-TD001K-EN-P - January 2021

PowerFlex DC Drive and Field Controller Technical Data 

PowerFlex DC Drive Specifications

Category

Specification

Agency Certification

c-UL-us

Listed to UL508C and CAN/CSA C22.2 No. 14-05.

CE

In conformity with the following European Directives:

• EMC Directive (2014/35/EU)

• Low Voltage Directive (2006/95/EC)

Standards applied:

• EN  61800-5-1

• EN  61800-3

RCM

Certified by Rockwell Automation to be in conformity with the requirements of the applicable Australian legislation and 

the standards referenced: IEC 61800-3.

Korean KC 

Registration

MSIP-REM-RAA-20P
See the certificate of registration for specific drive catalog numbers that have this certification.

(1)

(1) See the product certifications website, 

http://www.rockwellautomation.com/products/certification/

 for declarations of conformity, certificates, and other certification details.

The drive is also designed to meet the following specifications:

NFPA 70 - US National Electrical Code

Category

Specification

Drive Type

Full Wave Regen, 6 Pulse, Regulated Field Supply

Protection

Heat sink Thermistor:

Monitored by microprocessor overtemp trip

Drive Overcurrent Trip

• Software Overcurrent Trip:

• Hardware Overcurrent Trip:

• Programmable, 0…250% of rated current (175% default)

• Based on armature circuit fusing

Line transients:

Up to 2000 volts peak per IEC 6100-4-5

Control Logic Noise Immunity:

Showering arc transients up to 1500V peak

Power Ride-Thru:

15 milliseconds at full load

Logic Control Ride-Thru:

0.5 seconds minimum, 2 seconds typical

Environment

(1)

(1) PowerFlex DC drives must be installed in a Pollution Degree 2 environment.

Altitude:

1000 m (3300 ft) max. without derating.

De-rate output power by 1.2% for every 100 meters (328 ft) above 1000 meters (3300 ft).

Maximum Surrounding Air 

Temperature IP20, NEMA Type Open:

0…50 °C (32…122 °F), typical.

De-rate 1.25% for every 1 °C over 50 °C (122 °F), to 55 °C (131 °F).

More cooling is required for temps. above 55 °C.

Storage Temp. (all const.):

–25…+55 °C (–13…+131 °F)

Atmosphere:

Important:

 Drive 

must

 

not 

be installed in an area where the ambient atmosphere contains volatile 

or corrosive gas, vapors, or dust. If the drive is not going to be immediately installed, it must be 

stored in an area where it is not exposed to a corrosive atmosphere.

Relative Humidity:

Operating: 5…85% noncondensing

Storage: 5…95% noncondensing

Shock:

15G peak for 11 ms duration (±1.0 ms)

Vibration:

0.152 mm (0.006 in.) displacement, 1G peak

Содержание Allen-Bradley PowerFlex 23PFC















































































Отзывы:

Нет отзывов