Rockwell Automation Publication 750-IN118A-EN-P - May 2021
13
Chapter 1 Product Overview
Product Safety
Product Certifications and
Specifications
Rockwell Automation maintains current product certification information on
its website at
ATTENTION:
An incorrectly applied or installed drive system can result in component damage or a reduction in product life.
Wiring or application errors such as an under-sized motor, incorrect or inadequate AC supply, a corrosive environment, or
excessive surrounding air temperatures can result in malfunction of the system.
ATTENTION:
This product contains Electrostatic Discharge (ESD) sensitive parts and assemblies. Static control precautions
are required when you install these assemblies. Component damage can result if ESD control procedures are not followed. If
you are not familiar with static control procedures, reference any applicable ESD protection handbook.
ATTENTION:
Configuring an analog input for 0…20 mA operation and driving it from a voltage source could cause
component damage. Verify proper configuration before applying input signals.
Certification
Description
CE
In conformity with the following European Directives:
EMC Directive (2014/30/EU)
Low Voltage Directive (2014/35/EU)
RoHS Directive (2011/65/EU)
Standards applied:
EN 61800-3
EN 61800-5-1
Exposure to harmonics per Table 24 of IEC 61800-3 (second environment) results in drive shutdown in a safe condition.
China RoHS2
Compliant with China Restriction of Hazardous Substances Directive.
c-UL-us
UL: Listed to UL61800-5-1 up to 600V AC
Ecodesign Directive
Ecodesign Directive 2009/125/EC as implemented by Commission Regulation (EU) 2019/1781: PowerFlex 755T drives, bus supplies, and common bus
inverters are exempt from the efficiency requirements of Commission Regulation (EU) 2019/1781 on the basis of Article 2(3c) and (3d).
EMC
In conformity with EMC Directive (2014/30/EU).
C3 Directive for Conducted and Radiated Emissions:
All PowerFlex 755T drives, bus supplies, and common bus inverters
Functional safety
TÜV and Rheinland - Certification applies to 20-750-S, 20-750-S1, 20-750-S3 safety, and 20-750-S4 options when they are installed in the drive and are
configured according to the appropriate safety manual. See
Additional Resources on page 8
for a list of publications.
Standards applied:
IEC 61508 PARTS 1…7
EN 61800-3
EN 61800-5-1
IEC 61800-5-2
EN ISO 13849-1
IEC 62061
ISO 60204-1
Machinery Directive (2006/42/EC)
IEEE-519
PowerFlex 755TL, 755TR, and 755TM products meet or exceed the requirements of IEEE-519. Achieving less than 5% Total Harmonic Distortion (THD) at the
point of common coupling.
PowerFlex 755TL, 755TR, and 755TM products comply to IEEE-519 as written. Individual current harmonics and Total Demand Distortion (TDD) are specified
at 100% rating only.
KCC
Korean KC registration
Morocco
Certified to standard NM EN 61800-5-1
Network communication
ODVA Declaration of Conformity to the EtherNet/IP Specification
Packaging directive
In conformity with the Packaging Directive (94/62/EC and amendments 2004/12/EC and 2005/20/EC)
REACH
Regulation (EC) No. 1907/2006 concerning the Registration, Evaluation, Authorization and Restriction of Chemicals (REACH).
Regulatory compliance mark (RCM)
Australian Communications and Media Authority
In conformity with the following:
Radiocommunications Act: 1992 (including Amendments up to 2018)
Radiocommunications (Electromagnetic Compatibility) Standard: 2017
Radiocommunications Labeling Notice: 2008
Standards applied:
EN 61800-3:2012
UKCA
Standards applied:
EN 61800-5-1
EN 61800-3
