Rockwell Automation Publication 750-IN118A-EN-P - May 2021
119
Chapter 5 Service and Maintenance
9. If the position of the power connection (
, item 3) is
not ideally accessible, you can rotate it as follows:
a. Locate the bayonet connection release button on the rear of the fan, on
the opposite corner from the connection terminal.
b. Press down on the release button of the bayonet connection and rotate
the fan 90° in the direction you want. Once it reaches the corner
position, it snaps into position.
Figure 104 - Rotating the Fan Housing to Reposition the Power Connection
10. Remove the cover from the power connection.
Figure 105 - Power Connection Cover
ATTENTION:
Do not rotate the fan to a position where the power connection
is 180° from its original position that is shown in
so causes the airflow direction to reverse, moving air out of the bay instead of
into the bay. Reversing the airflow direction will cause problems with the
cooling system and damage to the bay.
