24
Rockwell Automation Publication 750-IN118A-EN-P - May 2021
Chapter 1 Product Overview
Configured Output Bay
The options in this section apply to an optional configured output bay that is
connected to the drive. A dash precedes each code in this section.
Figure 17 - Configured Output Bay Options, Catalog Number Positions 32…35
AC
Load Cable Exit Location
Code
Option
Frames
N
No Configured Output Bay
(1)
(1) Sets all configured output bay options to 'N' to allow for options for a configured-input-
bay-only setup.
8…9
(2)
(2) For use with regenerative power supply products and TL/TR drives.
A
Top Cable Exit
8…9
B
Bottom Cable Exit
8…9
AD
Output Power Filtering
Code
Option
Frames
N
No Output Filter
8…9
A
3% Output Line Reactor
8…9
B
5% Output Line Reactor
8…9
C
DV/DT Output
—
(1)
(1) Available in frame 8…9 via internal drive option
D
Sine-wave Output Filter
(2)
(3)
(2) Sine-wave output filters are not CE rated. If your product includes a sine-wave filter, refer
to the product data nameplate for CE certification information.
(3) Sine-wave output filters are only required when motor cables are longer than 305 m
(1000 ft).
8…9
AE
Output Contactor
Code
Option
Frames
N
No Output Contactor
8…9
A
Output Contactor
8
AF
Input Protection Auxiliary Contacts - Added to IP Device
Code
Option
Frames
A
1 NC Aux Contact
8
B
1 NO Aux Contact
8
C
1 NO Aux Contact, 1 NC Aux Contact
8
D
1 NO Aux Contact, 2 NC Aux Contacts
8
E
2 NO Aux Contacts, 1 NC Aux Contact
8
F
2 NO Aux Contacts, 2 NC Aux Contacts
8
G
2 NO Aux Contacts, 3 NC Aux Contacts
8
H
3 NO Aux Contacts, 2 NC Aux Contacts
8
I
3 NO Aux Contacts, 3 NC Aux Contacts
8
J
4 NO Aux Contacts, 4 NC Aux Contacts
8
32
-_
AC
33
-_
AD
34
-_
AE
35
-_
AF
