Rochester Gauges 6317-00001, Руководство пользователя

Страница: 6 / 12

The Measure of Excellence
e-Dial™ P/N: 6317-00001
4
Safety Barrier Installation Instructions
Connect e-Dial™ to barrier instructions
1. Open Safety Barrier box by removing the 4 screws
on the cover. Note box divider separating PCB is not
attached and may fall out.
2. Loosen the gland cover on the unpopulated cable fitting.
Included with each e-Dial™ is a remote safety barrier module to be installed in a
nonhazardous location per SD-581. The safety barrier comes with 5ft (1.5m) of cable
preinstalled. This is the power input for the device. e-Dial™ comes with a minimum 24ft
(7.3m) cable that can be cut to length. Use only a current limited source of ≤ 4.5 Amp to
the e-Dial™ Barrier. Utilisez uniquement une source de courant limitée de ≤ 4.5 Amp à la
barrière e-Dial™.
3. Remove the gland cover on the unpopulated cable fitting. Slide cover onto e-Dial™ cable and
push wires through fitting. Be careful that the waterproof rubber jacket stays in place.