Rochester Gauges 6317-00001, Руководство пользователя

Страница: 7 / 12

5
4. Pull cable through the water-proof fitting, once the cable’s jacket is past the rubber gasket.
Tighten the glands cover to close the seal to 22 lbf·in (2.5 N·m). Attach the wires to the terminal
block, pay close attention to polarity.
5. Re-install box divider
6. Check alignment of gasket before reinstalling cover
Mount Safety Barrier to Vehicle or Bulk Storage Tank.
Warning: Avoid mounting in direct sunlight or next to sources of heat.
Ideal mounting locations: truck cab, service, or electrical box
Connect Safety Barrier to Power Source
The equipment references neutral as earth. The end user shall ensure that there is no potential
difference between the neutral connections between the e-Dial™ and e-Dial™’s Barrier.
L’équipement fait référence au neutre comme à la terre. L’utilisateur final doit s’assurer qu’il n’y
a pas de différence de potentiel entre les connexions neutres entre le e-Dial™ et la barrière d’
e-Dial™.
Ensure proper termination of the power leads to power source. All leads should be crimped or
soldered and covered in heat shrink.
Assurez-vous que les fils d’alimentation sont correctement raccordés à la source d’alimentation.
Tous les fils doivent être sertis ou soudés et recouverts de thermorétractable.
7. Torque 4 screws to 12 lbf·in (1.4 N·m), now the case assembly is complete.