Rochester Gauges 6317-00001, Руководство пользователя

Страница: 8 / 12

The Measure of Excellence
e-Dial™ P/N: 6317-00001
6
• WARNING - POTENTIAL ELECTROSTATIC CHARGING HAZARD
Caution must be used when handling or cleaning products so there is no static
charge buildup. Do not wipe off the e-Dial™ sensor with dry cloth. Use only water
damp cloth and allow to air dry for cleaning device. Do not use or install in high
charge areas. See IEC60079-32-1 for further information.
• AVERTISSEMENT - RISQUE DE CHARGE ÉLECTROSTATIQUE POTENTIEL
Il faut être prudent lors de la manipulation ou du nettoyage des produits afin qu’il
n’y ait pas d’accumulation de charge statique. N’essuyez pas le capteur e-Dial™ avec
un chiffon sec. Utilisez uniquement un chiffon humide et laissez sécher à l’air pour
nettoyer l’appareil. Ne pas utiliser ou installer dans des zones de charge élevée. Voir
IEC 60079-32-1 pour plus d’informations.
List of safety Related info which is critical for safe operation.
Safety Specifications
Ordinary Locations Safety Standards
Conforms to UL STD 61010-1
Ed. 3
Electrical Equipment for Measurement, Control, and Laboratory Use;
Part 1: General Requirements
*Note: For USA ordinary locations listing certification
Certified to CSA STD C22.2
#61010-1-12 Ed.3
Electrical Equipment for Measurement, Control, and Laboratory Use;
Part 1: General Requirements
*Note: For Canada ordinary locations listing certification
Hazardous Locations Safety Standards
IEC 60079-0: 2017 Explosive atmospheres - Part 0: Equipment - General requirements
*Note: For IECEx Certification
IEC 60079-11: 2011 + C1: 2012
Explosive atmospheres - Part 11: Equipment protection by intrinsic
safety "i"
*Note: For IECEx Certification
IEC 60079-25: 2010 Ed 2.
Explosive atmosphere – Part 25: Intrinsically safe electrical systems
*Note: For IECEx Certification
EN 60079-0: 2018
Explosive atmospheres - Part 0: Equipment - General requirements
*Note: For ATEX Certification
EN 60079-11:2012
Explosive atmospheres - Part 11: Equipment protection by intrinsic safety "i"
*Note: For ATEX Certification
EN 60079-25: 2010
Explosive atmosphere – Part 25: Intrinsically safe electrical system
*Note: For ATEX Certification
Conforms to UL STD 60079-0 Ed.7
Explosive atmospheres - Part 0: Equipment - General requirements
*Note: For USA listing certification
Conforms to UL STD 60079-11
Ed.6
Explosive atmospheres - Part 11: Equipment protection by intrinsic
safety "i"
*Note: For USA listing certification
Certified to CSA STD C22.2
#60079-0 Ed.4
Explosive atmospheres - Part 0: Equipment - General requirements
*Note: For Canada listing certification
Certified to CSA STD C22.2
#60079-11 Ed.2
Explosive atmospheres - Part 11: Equipment protection by intrinsic
safety "i"
*Note: For Canada listing certification