Robotronics Patches & Pumper, Руководство по эксплуатации

Страница: 24 / 63

20
Chapter 3 Voice System: Moving Mouth
MOVING MOUTH
Function-
The moving mouth is a feature where the mouth moves as the operator
speaks through the robot. The amount of the movement is effected by the level of
volume of the voice. This level is effected by the Receiver volume level and the
position of the headset microphone to the operator's mouth. The sensitivity is set
based on a typical voice volume and the headset microphone being about 1 inch
from the operator’s mouth.
Adjustment- The adjustment is preset at the factory and should not need any adjustment.
If an adjustment is necessary, see the Main Circuit Board diagram in the Appendix
for the location of it. It is labeled Moving Mouth sensitivity. When this pot is adjusted
clockwise this makes the mouth more sensitive to your voice and turning it counter-
clockwise makes it less sensitive.
Location of the Adjustment
Main Electronics Box in Vehicle.