Robotronics Patches & Pumper, Руководство по эксплуатации

Страница: 50 / 63

46 Appendix A: Quick Reference Troubleshooting Chart
More detailed troubleshooting by system is included with each subsystem. For additional help or
parts call our service dept. at 801-489-4466.
Problem Cause Solution
In-line fuse blown.
Replace the 5 Amp fuse which is in-line on the
wire. Follow wire from water squirter switch.
Water Squirter
Cannot fill reservoir
Broken wire at water squirter switch or coming
from main box Repair break.
Water squirter switch is not in on position. On position is not the center position. Cannot squirt: no pump sound.
Broken wire at pump or W.S. switch. Repair/re-solder broken wire.
Reservoir empty Fill Reservoir with filler bottle.
Water line is not connected to water connector Connect it.
Cannot squirt: pump sound yes
Overflow tube and squirt tube are switched at
the reservoir. Swap them back. Overflow tube is the one that is
in the top of the bottle and the tube runs to an
outlet on the bottom of the frame.
Modifier not turned on.
Push pedal on modifier. Light should come on.
Voice Modifier
Voice not being modified
Audio wires not plugged in correctly Jumper wire goes from Nady Receiver to Inpu t of
Modifier. Wire in Output A of modifier goes to the
main board.