manualshive.com logo in svg

ROBOTIQ RWC-UR-KIT, Инструкция по эксплуатации

Поделиться
Скачать
ROBOTIQ RWC-UR-KIT Скачать руководство пользователя страница 18

Robotiq Wrist Camera Vision System for Universal Robots

Instruction Manual

Robotiq inc. © 2016

18

1.  
2.  

3.6 Software Installation

The Wrist Camera's software installation has to be performed in two parts, in the order: 

Vision server installation - 

Section 3.6.1

URCap package installation - 

Section 3.6.2

Make sure the Wrist Camera is properly mounted to the robot arm and that all electrical wiring is correctly done. Refer to 

 and 

Section 3.4

3.5 

for

detailed information on the mechanical and electrical installation. Before proceeding with the installation of the URCaps package, make sure your
Universal Robots’ software is up to date. The PolyScope must be at least a 3.3 in order to install a URCap.

If a software update has to be performed (after a new release), please refer to 

 to know how to update properly. 

Section 3.6.3

Software version
Both Vision Server and URCap package have to be the same version (for instance, both 1.0.2) in order for the Vision system to be functional.

Do not unplug the 16 Gig USB stick or the licence USB dongle, even after the installation is completed.

Center of mass
Prior to use over 

, adjust the center of mass and payload from the Installation tab (refer to 

).

Universal Robots

Section 6.1.1

Содержание RWC-UR-KIT



















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды