manualshive.com logo in svg

ROBOTIQ RWC-UR-KIT, Инструкция по эксплуатации

Поделиться
Скачать
ROBOTIQ RWC-UR-KIT Скачать руководство пользователя страница 19

Robotiq Wrist Camera Vision System for Universal Robots

Instruction Manual

Robotiq inc. © 2016

19

3.6.1 Vision Server Installation

Make sure the Wrist Camera is properly mounted to the robot arm and that all electrical wiring is correctly done. Refer to 

 and 

Section 3.4

3.5 

for

detailed information on the mechanical and electrical installation. Before proceeding with the installation of the URCaps package, make sure your
Universal Robots’ software is up to date (version 3.3.1.237 on the release date of this manual). 

Follow this procedure to install the Wrist Camera's Vision Server:

Go to 

 and visit the Vision System page.

support.robotiq.com

Download the latest Vision Server UCC zipped file:

 

Figure 3.6.1.1: Vision Server download on 

 .

support.robotiq.com

 

Make sure you unzip the content of the UCC file directly on the USB stick as shown: 

Figure 3.6.1.2: File extraction on the provided 16 Gig USB stick.

Turn on the Universal Robots controller.
Once it is turned on, connect the 16 Gig USB stick, containing the unzipped UCC file in the 4 ports USB hub (ACC-USB-4-HUB). 

 

Software version
Both Vision Server and URCap package have to be the same version (for instance, both 1.0.2) in order for the Vision system to be functional.

Содержание RWC-UR-KIT



















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды