manualshive.com logo in svg

ROBOTIQ RWC-UR-KIT, Инструкция по эксплуатации

Поделиться
Скачать
ROBOTIQ RWC-UR-KIT Скачать руководство пользователя страница 15

Robotiq Wrist Camera Vision System for Universal Robots

Instruction Manual

Robotiq inc. © 2016

15

3.4 Mechanical Installation

Wrist Camera kit for Universal Robots

For mechanical installation of a Wrist Camera on a UR robot along with an end-effector (other than Robotiq's 2-Finger Gripper), follow these instructions
and refer to Figure 3.4.1: 

Place the Wrist Camera (RWC-CAM-001) on the robot arm. Align the camera's indexing (dowel) pin properly in Universal Robots' bolt pattern. 
Place the tool plate (RWC-TOOL-062) on the camera. Align the tool plate's indexing (dowel) pin correctly in the Wrist Camera.
Fix the desired end-effector on the robot arm, through the tool plate and the camera, using M6 screws.
Fix the cable along the robot arm, see 

.

Cable Management section

Figure 3.4.1: Mechanical installation of the Wrist Camera kit for Universal Robots.

The end-effector is not screwed in the camera or the tool plate, but directly in the robot arm. Both camera and tool plate have through holes
for this assembly.

Hardware
M6 screws to mount an end-effector on the Wrist Camera are not provided. Use M6 screws of appropriate length to secure the end-effector
on the robot arm.

Содержание RWC-UR-KIT



















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды