ROBOTIQ 56819B Скачать руководство пользователя

Страница: 10 / 95

Finishing Kits Warning

The hardware components of the Finishing Kits need to be properly secured before operating the robot.

Eye protection must be worn at all times when using finishing tools.

Keep fingers, clothes and hair away from the sanding tool while the power is on.

Do not install or operate Finishing Kits that are damaged or have lacking parts.

Be sure no one is in the robot and/or tooling path before initializing the robot's routine.

Always meet the Finishing Kits payload specifications.

Some dust created by sanding contain chemicals. Work in a well ventilated area or wear appropriate protection.

Do not use the Finishing Kits in potentially explosive atmospheres.

Make sure no one is in the robot and/or the Finishing Kit's path before initializing the robot's routine.

Potentially explosive atmospheres can be caused by dust and fumes resulting from sanding or grinding. Always use

dust extraction or suppression systems which are suitable for the material being processed.

All local safety measures and/or laws on robot operation must be applied to all the Robotiq products mentioned in this

instruction manual.

Do not use any of the Robotiq products on people or animals.

Refer to the finishing tool’s instruction manuals for further warnings and safety considerations.

Sensor Warning

Never supply the Sensor with an alternative current source.

Make sure all cord sets are always secured at both ends, at the Sensor and at the robot controller.

Always meet the recommended keying for electrical connections.

Содержание 56819B
































































































Результаты поиска

Содержание 56819B

Отзывы:

Похожие инструкции для 56819B

Бренды по названию

Популярные бренды

ROBOTIQ 56819B, Инструкция по эксплуатации

Результаты поиска

Содержание 56819B

Отзывы:

Похожие инструкции для 56819B

Бренды по названию

Популярные бренды