Robot System Products P6413, Руководство по эксплуатации продукта

Страница: 31 / 44

M0620-1 ver 2.8 31
4.1.5 Activities and intervals on tool attachment
Equipment Maintenance
activity Interval Description
Tool attachment Inspection 2 weeks Visual inspection of tool attachment (see section
4.2.2 ).
Tool attachment Cleaning 1 month Cleaning of tool attachment, interval depending
on the environment (see
section 4.3.2 ).
Grooves Cleaning 1 month Wipe the grooves for the locking balls clean (see
section 4.3.2 ).
Signal contacts Cleaning 1 month Wipe the contact surface clean (see section
4.3.2 ).
4.2 Visual inspection
4.2.1 Inspection of the swivel tool changer
Visually check the following:
Check Note
Air connections Not damaged or dirty
Air sealings No wear, not damaged or dirty
Electrical connection (STC250-6E only) Not damaged or dirty
Signal pins (STC250-6E only) No wear, not damaged or dirty
Locking balls Greased, not dirty
All parts No wear, not damaged or dirty
4.2.2 Inspection of the tool attachment
Visually check the following:
Check Note
Air connections Not damaged or dirty
Contact surface of air sealings Not damaged or dirty
Signal contact surface (TA250-8E only) No wear, not damaged or dirty
Electrical connection (TA250-8E only) Not damaged or dirty
Cables (TA250-8E only) No wear, not damaged
All parts No wear, not damaged or dirty