Robot System Products P6413, Руководство по эксплуатации продукта

Страница: 29 / 44

M0620-1 ver 2.8 29
4 MAINTENANCE AND SERVICE
4.1 Maintenance chart
The swivel tool changers and the tool attachments must be maintained regularly
to ensure proper function. The specified intervals are approximate and valid under
normal conditions. Under extreme conditions, such as dirty environments or
extreme robot movements, the intervals should be shortened. Consider the table
as a guide and update as the production experience of each system increases.
WARNING!
There is a risk of getting squeezed between piston and ball holder when the
piston is taking closed position.
NOTE!
Only perform work on grippers or tools attached to the swivel tool changer if the
air pressure is safely switched off.
NOTE!
Swivel tool changers must only be dismantled and repaired by Robot System
Products during the warranty period. Otherwise the warranty will not be valid.
4.1.1 Required products
Product Specification Note
Grease,
3HXG1000-413 Magnalube-G Teflon
grease Air sealings and O-rings.
Grease I0876 Molykote BR2Plus For locking balls.
Cleaning agent Denatured alcohol or
similar Signal pins at swivel tool changer
and power pins at tool
attachment.
Cleaning agent Denatured alcohol or
similar For swivel tool changer and tool
attachment.
Cloth Lint free cloth For cleaning.
NOTE!
Chemical resistance protective gloves are recommended when using grease or
cleaning agents such as denatured alcohol. Safety goggles are recommended
when working with cleaning agents such as denatured alcohol. Adequate
ventilation should be provided when chemical substances are used.