Robopac Rotoplat DW 108-508, Руководство по эксплуатации и обслуживанию, Страница: 56 / 88

- 52 -
English
Chapter 6
ABOUT THE USE
O) Button : it is used to copy the data of one layer onto another.
P)
Wrapping cycle.
Q) Distance from the ground of wrapping start.
R) Programming the reinforcement wrapping.
The T keys described below are displayed only if the optional
accessories are supplied (See the description of the chapter on the
screen “Wrapping cycle”):
T1 Pressure platen.
T2 Cutting.
T3 Altimeter.
T4 Creasing device.
T5 F1 Special cycle.
S) Tool bar .
The tool bar is displayed on all the screens and contains only the
keys that can be activated.
The list shows the description of the elements (push-buttons, icons,
Etc…) displayed in the area.
‒ Push-button : used to display the “Recipes” screenshot.
The number displayed indicates the activated recipe.
‒
Area
: displays the name of the activated recipe.
‒
Push-button : (impulse): used to bring back the trolley to the down
limit stop
With the trolley at the down limit stop, the button is not displayed
To stop the travel, press the "stop cycle" button.
‒
Push-button
: it is used to display the “Manual handling” page.
‒
Push-button : used to display the “General parameters” screenshot.
‒
Push-button : used to display the upper level screenshot.
‒ Push-button : used to display the “Home” screenshot.