Robopac Rotoplat DW 108-508, Руководство по эксплуатации и обслуживанию

Страница: 25 / 88

- 21 -
G
H
14C214005
G
H
G
H
Rotoplat DW-C 108 - 508 Rotoplat DW 108 - 508
English
- 21 -
Chapter 3
TECHNICAL INFORMATION
3.4. SAFETY DEVICE DESCRIPTIONS
The figure shows the positioning of the devices on board of the machine.
A) Reel carriage base microswitch :
stops the descentwhen there are
obstacles underthe carriage.
B) Mechanical device for
blockingthe reel carriage : it
stopsthe reel carriage falling in
theevent that the lifting ropebreaks.
C) Main switch : to turn the
electricsupply on and off. It
can bepadlocked to prevent
unauthorisedpersonnel from
startingthe machine during
adjustmentsand maintenance.
D) Acoustic signal : signals the start
of the wrapping cycle:
E) Switch for “Pluriball” carriage :
stops the descent in presence of
obstacles below the reel carriage.
G) Emergency button ; the machine stops immediately when this
button is pressed in emergency situations.
To reset, rotate the button in the direction indicated by the arrow.
Danger - Warning
With the emergency button pressed, there might still be voltage
at the terminals of the motor.
H) Key selector
: used to reset the emergency of the spool carriage. If
kept rotating it allows to lift the trolley through the manual controls
on the user interface.