Robopac Rotoplat DW 108-508, Руководство по эксплуатации и обслуживанию, Страница: 40 / 88

- 36 -
C
B
A
Rotoplat DW 108 - 508
Rotoplat DW-C 108 - 508
14C214027
A
Rotoplat DW 108 - 508
Rotoplat DW-C 108 - 508
14C214028
English
Chapter 4
INFORMATION ON HANDLING AND INSTALLATION OPERATIONS
4.7. PNEUMATIC CONNECTIONS
Proceed as indicated.
1. Insert a flexible tube on the end
of the rubber fitting and fasten it
with a metallic screw clamp (A) .
2. Check that the valve (B) is in the
“OPEN” position.
3. Turn on the power supply line.
4. Check that the manometer reads
a pressure of at least 6 bar and
turn knob (C) to compensate any
pressure differences.
Repeat this operation with the
machine running.
4.8. ELECTRICAL CONNECTION
Proceed as follows for electrical connections
1. Check that the mains voltage (V)
and frequency (hertz) correspond
to those of the machine
(see identification plate and wiring
diagram).
2. Turn the mains switch to 0 (OFF) .
3. Connect the power cord to the
outlet (A) , as illustrated, according
to the network mains
4. The earth wire (yellow and green)
must be connected to its earth
terminal PE.
5. Turn on machine with main switch
6. Press the “Reset” button .
7. If you press the “start” button, the
worktable must turn in a clockwise
direction