Robopac Rotoplat DW 108-508, Руководство по эксплуатации и обслуживанию

Страница: 34 / 88

- 30 -
English
Chapter 3
TECHNICAL INFORMATION
3.10. NOISE LEVEL
The noise levels were measured in compliance with the standards.
– ISO 4871
– ISO 11201
Description Measured level of A weighted emission sound pressure, in the
operator position (LpA)
Functioning in working conditions. 69,3 dB (A)
Caution - Warning
Prolonged exposure over 80 dB (A) may cause health problems.
The use of appropriate protection systems is recommended
(headphones, ear plugs, etc.)
3.11. INSTALLATION ENVIRONMENT
CHARACTERISTICS
Careful consideration must be given to the place where the machine
is to be installed, in order to ensure that it may be easily operated,
without creating any unnecessary risks for personnel. Therefore we
suggest the following prerequisites.
– Suitable room temperature (See “Technical data “ROTOPLAT DW
108-508”” - “Technical data “ROTOPLAT DW-C 108-508””).
– A suitably aired place so that when the machine is working, the
degree of humidity is not unpleasantly high/low from the point of
view of the operator.
– A sufficient lighting in order that a pleasant, relaxing working
environment is created for the operator.
– a boundary area that must be left around the machine for safety
rea-sons (See “surrounding areas”).
– a flat surface, steady and without vibrations with adequate weight
supporting capacity, also in consideration of the palletised loads
to be wrapped.
– The area must be equipped with a power supply socket and a
compressed air supply socket.
Danger - Warning
Use of this machine in explosive environments or when exposed
to the elements is strictly forbidden.