Robopac Rotoplat DW 108-508, Руководство по эксплуатации и обслуживанию, Страница: 50 / 88

- 46 -
English
Chapter 6
ABOUT THE USE
6.3. DESCRIPTION OF THE USER INTERFACE
The user interface is equipped with an active matrix colour “touch-
screen” display.
Just “touch with a finger” the areas of the display to view the various
functions.
The illustration shows the logic functional diagram of “navigation” modes.
There are two automatic wrapping cycle controls: standard CONTROL
and MULTI-LEVEL CONTROL (from the screen “layer home”).
MULTI-LEVEL CONTROL allows you to divide the height of the product
in 5 different levels, all of which can be adjusted in thickness, and for
each one of them it is possible to regulate the tightness of the film, the
drawing (on motorized carriages only), the reinforcements, the rotation
speed of the machine and the speed of the carriage.
Each one of the 5 levels can be set with values depending on the
direction of the carriage, which can also be different between ascent
and descent.
Table 6.1.: User Interface
N Name Function description
1
“Home” screenshot
The screenshot is displayed at the activation of the Reset control.
The page displays the wrapping parameters currently in use and
gives access the other pages.
1.1
“Home layers” screenshot.
The screenshot is displayed at the activation of the push-button
on the right of the various recipes of the “Recipes” screenshot.
The page displays the wrapping parameters currently in use and
gives access the other pages.
2 “Manual handling” screenshot. The screenshot shows he controls to activate the handling of
functions in “manual mode”.
3 - 3.1 “Recipes” screenshot. The screenshot displays the controls to activate the desired recipe.
4 “Wrapping cycle” screenshot.
The screenshot displays the controls to program the wrapping
cycle.
5
“General parameters”
screenshot.
The screenshot displays the controls to program the configuration
parameters of the machine.
6
“Production counters (pallets”)
screenshot.
The screenshot displays the controls to check the quantity of
pallets made (partial and total).
7 “Enabling” screenshot (H.M.I). The screenshot displays the controls to customize the operating
mode of the user interface”.
8
“Password modification”
screenshot.
The screenshot displays the controls to modify the access
password to the protected functions.
9
“Password insertion (user
login)” screenshot.
The screenshot displays the controls to insert the password
(concerning the user selected) with the purpose of accessing
the protected functions.
10 “Service” screenshot.
The screenshot is only reserved to the Manufacturer’s Support
Service to perform the diagnostics and the basic programming.
For details on the listed screenshots, consult the description shown on
the specific paragraph.