Robopac ROBOT S7, Руководство по эксплуатации и обслуживанию

Страница: 67 / 92

ENG INFORMATION ABOUT THE USE
67
6.7. “WRAPPING CYCLE” PAGE
The page displays the controls to program the wrapping cycle.
At every activation, the button displays the enabled function with the reference icon.
A) Area: it displays the name of the recipe being programmed.
B) Area: it displays the preview of the selected pallet wrapping cycle.
C) Button: it is used to select the type of pallet wrapping cycle.
At every activation, the button displays the enabled function with the reference icon.
−
Icon (C1): it is used to select the "Single wrapping" cycle.
− Icon (C2): it is used to select the "Double wrapping" cycle.
−
Icon (C3): it used to select the "Double wrapping cycle with feeder".
D) Button: it is used to set the rotation speed of the machine.
E) Selector button: it is used to set the upstroke and downstroke speed of the carriage.
Press and hold the button to switch to the "Carriage upstroke in one turn" mode.
−
Icon (E1): it is used to adjust the speed of the carriage.
− Icon (E2): it is used to adjust the upstroke of the carriage moving at each turn of the
packaging.
F) Button: it is used to enable and disable the programming of the distance from the
ground (offset) at the beginning of wrapping.
G) Button: it is used to program the positioning value and the number of reinforcing
wrappings.
H) Selector button: it is used to select the stop mode (automatic or programmed) of film
carriage during upstroke.
At every activation, the button displays the enabled function with the reference icon.
−
Icon (H1): Automatic stop using photocell and setting of the relative delay for reading
the height of the pallet
− Icon (H2): Programmed stop by means of altimeter and setting of the relative maximum
desired wrapping height.
I) Button: used to enable/disable the cutting.
Only if cutting is present.