Robopac ROBOT S7, Руководство по эксплуатации и обслуживанию

Страница: 30 / 92

30
TECHNICAL INFORMATION ENG
3.3. SAFETY DEVICE DESCRIPTION
The figure shows the position of the devices on the machine.
A) Emergency bumper
in case of impact with an obstacle, it stops the machine feeding and wrapping phase.
Remove the obstacle, cut the film and press the control to reset the machine.
Once the film carriage has reached the starting position, restart the machine to repeat the wrapping.
For further details, see paragraph "wrapping start and stop".
B) Emergency stop button
it is used in case of imminent risk to stop, with a voluntary action, the machine parts which may pose a risk.
The control must be “locked” until the normal operating conditions have been r estored.
Restore the normal operating condition, cut the film, unlock the button and press the control to reset the machine.
Once the film carriage has reached the starting position, restart the machine to repeat the wrapping.
For further details, see paragraph "wrapping start and stop".
C) Light indicator
it signals machine statuses:
- red: machine in emergency;
- flashing blue: machine waiting to be reset;
- green: machine ready to start;
- flashing yellow: machine running.
D) Acoustic warning device
it warns that the wrapping cycle has started after 5 seconds.
E) Safety microswitch
positioned on the door of the film carriage, locks the machine if it is opened while the machine is running.