Robopac ROBOT S7, Руководство по эксплуатации и обслуживанию

Страница: 38 / 92

38
INFORMATION ON HANDLING AND INSTALLATION ENG
4. INFORMATION ON HANDLING AND INSTALLATION
4.1. RECOMMENDATIONS FOR HANDLING AND LOADING
- Before performing any operation, the authorised operator must make sure to have understood the “Instructions
for use”.
- Carefully read the “Instructions for use” specified in the manual and those applied directly to the machine and/or
the package.
- Provide suitable safety conditions in compliance with the regulations on workplace safety to prevent and
minimise the risks.
- Pay attention to the safety warnings, do not misuse the machine and assess the possible residual risks.
Caution - warning
Batteries should be charged as soon as the machine is unpacked.
If the robot is stored without being used, it should be charged at least once every three months.
4.2. PACKING AND UNPACKING
The packing is realised, keeping the overall dimensions limited, also in consideration of the transport chosen.
To facilitate transport, shipping can be performed with some components disassembled and appropriately protected and
packaged.
Some parts, especially electrical equipment, are protected with anti-moisture nylon covers.
The packages bear all necessary information for loading and unloading.
When unpacking, check the integrity and exact quantity of the components.
Packaging material should be appropriately disposed of according to the laws in force.
The illustrations show the common types of packaging used.
Package on pallet with nylon protection
Package in crate