Robopac ROBOT S7, Руководство по эксплуатации и обслуживанию

Страница: 78 / 92

78
INFORMATION ABOUT THE USE ENG
6.17. FILM REEL FEEDING (APPLICABLE TO "P3GS" AND "PVS” CARRIAGES ONLY)
1. In “MANUAL HANDLING” mode bring the carriage all down.
2. Extract the terminated film reel, insert the new film reel (A) in the relevant seat on the film carriage.
3. In “MANUAL HANDLING” mode bring the carriage to a suitable height to insert the film. The base of the carriage
should approximately be at a height between 850 and 1100 mm from the ground, according to the operator’s
height.
4. Open the door (B) using the lever (C).
5. Collect the film until a thin cord is obtained and route it in the opening (D) as indicated.
6. Pull the film outwards.
7. Close the door (B).
Danger - warning
The operation must be performed by one operator only.
The operation must not be performed by more than one operator.
Operating modes other than the ones described can be harmful to the operator, and film insertion may
prove more difficult.