ORBIT 16
6.11.5. MACHINE STOPPED IN EMERGENCY CONDITION BECAUSE ONE OF THE
LIGHT CURTAINS TRIPPED
If the machine enters an emergency condition because the light curtain tripped, proceed as follows:
‒
Determine whether the obstacle is
located at machine inlet or outlet by
checking the condition of the green
illuminated push-button switch
(G)
; if the
light is off, the machine is locked.
‒
Turn the Override key selector switch to
disable the light curtains for a preset
time.
‒
If necessary, remove the product from
the machine using the manual controls.
‒
Press the restart push-button
(G)
to
reset the light curtain.
If you wish to continue the winding that was interrupted, you must press the START button.
If a new operation is to be started, proceed as follows:
1.
Remove product from the machine.
2.
Press the key
(A)
to synchronize the
machine or press the "Reset" push-
button.
3.
Block the film inside the clamp (see
6.9.
“Machine boot” - “Coating insertion inside the gripper”).
The machine is ready for a new wrapping cycle.
81/95
