ORBIT 16
6.3.2.MAIN PAGE
The page displays the wrapping
parameters currently in use and gives
access the other pages.
A)
Displays the name of the recipe in use.
B)
Key to access the no. of windings setting
(see
6.5.
“Cycle parameter setting”).
C)
Main display, it shows the winding cycle
selected in the active recipe (see
6.5.
“Cycle parameter setting”).
D)
Key to access the recipes list.
E)
It displays the authorised operator.
F)
Software change key (see
6.3.
“Operating terminal description” - “Date and time setting”).
G)
Key for accessing manual movements.
H)
Key to access the start winding time setting (see
6.5.
“Cycle parameter setting”).
I)
Button to access the rotating ring and carriers speed setting (see
6.5.
“Cycle parameter setting”).
L)
Key to access the product winding time setting (see
6.5.
“Cycle parameter setting”).
M)
Key to access the product end winding time setting (see
6.5.
“Cycle parameter setting”).
N)
On off key to enable/disable the coating breakage control.
O)
On off key to enable/disable the outlet pressure roller descent advance.
P)
On off key to enable/disable heat sealing (key available only if the optional welder is installed).
Q)
Key to set the sealing time (present only if the welding of the
P
key is enabled).
R)
Cycle reset key.
S)
Displays the machine status.
- S1:
Machine Stopped
- S2:
Machine Reset in progress
- S3:
Machine in Automatic mode
T)
Key to access the no. of additional bands setting (key available only if the cycle “Winding”head and
additional bands“has been selected).
57/95
