Robitronic Overloader 2, Инструкция по эксплуатации

Страница: 28 / 32

Serial PC connection / LogView
28
LogView
LogView is a free software and can be downloaded in the newest version under
www.logview.info. This software allows to monitor all relevant charge-,
discharge- and cycle-parameters graphically in many different ways. You can
compare different readings; edit them, store them for future references and
print them.
First steps in LogView
In the moment the LogView software is only available in German user language,
but it is possible that an English version will follow in the future.
After you have installed and started the software, in the next step you have to
choose the right “Gerät” (unit) and the right “Port”. For that you click in the menu
bar on “Geräte” and in the opening window on “Gerät und Port wählen”.
The Robitronic USB interface (RS153) has to be connected and the necessary
driver has to be installed. The right driver is delivered together with the
USB interface.
The Overloader2 is equipped with a serial PC connection
slot on the right side of it’s aluminum housing. With the
article-number RS153 is an optional USB interface
available. With a connection to you PC or laptop you can
view, edit and file all of your charging and battery
information data on your computer. You can also update
your Overloader2 with newer software versions in the
future. For handling the data transfer the Overloader2 is
preset for LogView software (www.logview.info).