Robitronic Overloader 2, Инструкция по эксплуатации

Страница: 16 / 32

Motor break-in
Set-up motor break-in
This is where you are when you first enter the
motor break-in mode.
- With and you adjust the duration
time for motor break-in from 0:01:00
to 9:59:00 in 1-minute increments.
- The buttons and change the
motor break-in voltage from 0.1V to 8.0V
in 0.1 increments.
- The button starts the motor
break-in process.
- With the button you will switch
corresponding to the adjustment into
the glow plug, tire heating or
display mode.
count-
down
real break-in
voltage
amperage
duration
time
break-in
voltage
amperage
motor-
animation
amperage
visual
display
During motor break-in
The motor animation symbolizes the running
break-in process. The adjusted duration time runs
down in a count down format. Instead of the
adjusted motor break-in voltage now the REAL
running voltage is displayed. The actual amperage
is shown in graphic form (in relation to the
maximum of 10A) and in digital figures, also.
- The buttons and can still be used
to readjust the duration time for the motor
break-in.
- With and you can still change the
motor break-in voltage during the running
process.
- The button has no function during the
running break-in process.
- With you can always stop the break-in
process.
16
ENTER /
START
MODE /
CANCEL
DOWN
ENTER /
START
_
MODE /
CANCEL
+
UP
DOWN
ENTER /
START
_
MODE /
CANCEL
+
UP