Robitronic Overloader 2, Инструкция по эксплуатации

Страница: 12 / 32

Profiles
Charge mode
- 6 different charge modes are supported.
linear charge (Linear)
impulse charge (Impulse)
reflex charge (Re-Flex)
auto charge (Auto)
4-step charge (4-Step)
constant current-constant voltage charge (CC-CV)
- Available values are Linear, Impulse, Re-Flex, Auto, 4-Step und CC-CV.
- You will find a brief description of the different charge modes at the end of this manual.
- Note, that availability of charge modes depends on the selected battery type.
- Note, that the charge mode setting will affect other profile settings.
Set up 4-Step charge
- When charge mode 4-step is selected, the button opens the 4-Step Setup menu.
- Select the value you want to change with and .
- Use and to change the highlighted value.
- First row values are the capacity thresholds. When the added capacity passes the capacity
threshold, the next step beginns.
- The charge currents in the second row belong to the steps 1 to 4.
The setting in our example would to the following:
The charger starts charging with a charge current of 3.0A.
When the added capacity reaches 1000mAh, step 2 beginns and charge current is increased to 6.5A.
At 3000mAh step 3 with 5.0A is in action.
The last step is introduced with the capacity threshold of 3700mAh.
The battery is charged with 4.0A.
The last value of 4300mAh is the nominal capacity. In combination with the maximum capacity
it is a charge end mechanism.
- Note, that each following threshold must be higher than the previous one.
threshold 1-2 < threshold 2-3 < threshold 3-4 < nominal capacity
- Note, that nominal capacity of 4-step setup will overwrite the setting of the profile.
- To leave the 4-step setup menu press or .
12
est. charge time
graphical view
current against capacity
capacity threshold
1-2 / 2-3 / 3-4 / finish
charge current per step
1. st. / 2. st. / 3. st. / 4. st.
cursor
DOWN
ENTER /
START
_
+
UP
ENTER /
START
MODE /
CANCEL