Robitronic Overloader 2, Инструкция по эксплуатации

Страница: 22 / 32

Adjustments
LCD contrast
- The brilliance/contrast can be adjusted from 1 to 15 (low to high).
22
Charge switch-Off voltage Lixx
- Can be adjusted from 3,3V to 4,3V in 0,1 V increments.
- LiIon batteries are existing in quite many different variations and with different
voltage switch-off requirements. The developments in this battery section are
continuously going on. Therefore the Overloader2 is adjustable for this kind of
battery technology within the necessary range.
- This way the Overloader2 comes already prepared for further future
developments in battery technology.
- PLEASE NOTE: it is absolutely important, that the user adjusts the switch-off
voltage for these types of battery exactly according to the instructions
from the battery manufacturer. Read and follow the battery instructions!
LCD light
- The blue display light can be switched ON or OFF.
Motor break-in mode
- Can be switched ON or OFF.
- In position ON the motor break-in mode can be reached over the button.
- In position OFF the motor break-in mode is not reachable over the navigation
until it is activated again here in the “adjustments” section.
- This speeds up the navigation by switching OFF functions, which are not in use.
Glow plug heating mode
- Can be switched ON or OFF.
- In position ON the Glow plug heating mode can be reached over the button.
- In position OFF the Glow plug heating mode is not reachable over the
navigation until it is activated here in the adjustments.
- This speeds up the navigation by switching OFF functions, which are not in use.
Tire heating mode
- Can be switched ON or OFF.
- In position ON the Tire heating mode can be reached over the button.
- In position OFF the Tire heating mode is not reachable over the navigation
until it is activated here in the adjustments.
- This speeds up the navigation by switching OFF functions, which are not in use.
Software Version
- There are no adjustments possible here.
- This is just for information reasons only. It shows which software
version is currently running on your Overloader2.
MODE /
CANCEL
MODE /
CANCEL
MODE /
CANCEL