Roberts Gorden Energytube EM-115, Инструкция по установке, эксплуатации и обслуживанию

Страница: 41 / 82

SECTION 8 : V
ENTING
35 of 71
8 .11 Outside Combustion Air Supply
IMPORTANT: If the b u ilding has a slight negati v e
press u re or corrosi v e contaminants s u ch as
halogenated hydrocarbons are present in the air, an
o
u tside comb u stion air s u pply to the heater is
req u ired. Seal all comb u stion air pipe joints.
The air s u pply d u ct may ha v e to be ins u lated to
pre v ent condensation on the o u ter s u rface. The
o u tside air terminal m u st not be more than 1' (31 cm)
abo v e the v ent terminal.
Use of optional o u tside comb u stion air is not
recommended w ith u n v ented heaters.
8 .11.1 Len g th Re q uirements
Follo w the constraints listed on Page 32, Section 8.6 .
8 .11.2 Vertical Outside Air Supply for Sin g le Heater Installation
8 .11.3 Horizontal Outside Air Supply for Sin g le Heater Installation
Description Part Number
Vent Cap 4" (10 cm) for 80,000 Bt u /h
and 115,000 Bt u /h models
90502300
Vent Cap 5" (13 cm) for 150,000 Bt u /h
and 200,000 Bt u /h models
90502301
SIDE VIEW
Band Clamp
(Recommended)
Flex Hose
(Recommended)
Vent Cap
W
all
For 80 and 115 models,
4" (10 cm) Single Wall Pipe.
For 150 and 200 models,
5" (13 cm) Single Wall Pipe.
Burner
4"
(10 cm)
Min.
SIDE VIEW
Description Part Number
Vent Cap 4" (10 cm) for 80,000 Bt u /h
and 115,000 Bt u /h models
90502300
Vent Cap 5" (13 cm) for 150,000 Bt u /h
and 200,000 Bt u /h models
90502301