Roberts Gorden Energytube EM-115, Инструкция по установке, эксплуатации и обслуживанию

Страница: 23 / 82

SECTION 6: H
EATER
I
NSTALLATION
17 of 71
Step 6.3 Couplin g and Tube Assembly
Step 6.3.1 Couplin g and Tube Assembly (Continued)
Tube
Tube
Orient coupling so that
the impact block is in the
2:00 or 10:00 o’clock
positions.
Closed
Open
Tab
3" (8 cm) to
4" (10 cm)
Slide Bar/Coupling Lock
Coupling
Wide End
Coupling
Tube
Slide Bar/Coupling Lock
A Close co u pling
w ith tab.
B Start Slide bar/Co u pling
Lock.
C
Insert t u bes into co u pling.
D
Tighten co u pling to join t u bes.
Description Part Number
Co u pling 01329600
Slide bar/Co u pling Lock 01329700
T u be 91409XXX
Incorrect slide bar
position
Correct slide bar
dimensions
± 2" (5 cm)
Drive slide bar until tight.
End of slide bar should be
within tolerance listed below.
• Repeat Step 6.3 A - D until all tubes are assembled. See Page 18, Section 6.3.2 .
Ti g hten slide bar as shown below.