manualshive.com logo in svg

RKI Instruments 04 Series, Руководство оператора, Страница: 68 / 98

Поделиться
Скачать
RKI Instruments 04 Series Скачать руководство пользователя страница 68

68 • Chapter 6: Maintenance

SC-04

8. The sensor filter sits in the middle of a black gasket. Pry the sensor filter out of the gasket.

9. Install a new sensor filter. If the gasket got removed, install it with the flat side facing the 

white hydrophobic filter.

10. If necessary, put the sensor in the socket on the rear case. The colored side faces away 

from the rear case and the slots in the sensor line up with tabs in the socket.

CAUTION:

Forcing a sensor into a socket without lining the sensor slots up with the socket 

tabs may damage the sensor or socket.

11. Reinstall the front case to the rear case.
12. Reinstall the 4 screws that were removed in Step 3.
13. Reinstall the rubber boot, if being used.

Figure 13: Sensor Filter Location

Hydrophobic Filter

Sensor Gasket

Sensor Gasket

Sensor Filter

Sensor Filter 

Front Case

Front Case Inside View

Instrument Side View

Rear Case

Содержание 04 Series



































































































Отзывы:

Нет отзывов