SC-04
Chapter 3: Measuring Mode • 25
Data Logging
The SC-04 logs Measuring Mode gas readings, alarm data, and calibration data to its internal
memory. Logged data can be download it to a computer via the infrared communications port
on the front of the unit.
The data logging capacity depends on how often the SC-04 stores data and how often the
SC-04 is turned on and off. The table below illustrates how much data logging time is
available for the various interval times. It assumes that the unit is only turned on once and
there are no alarms. The data logging interval time must be set using the 04 Series
Datalogging Program.
To utilize the SC-04’s downloading capability, you need:
•
PC with Windows 7, Windows 8, or Windows 10
•
IrDA port or IrDA/USB cable (cable available from RKI Instruments, Inc.)
•
04 Series Datalogging Program (available at www.rkiinstruments.com/04series).
For a complete description of the Datalogging Program and procedures for downloading data
to a computer, see the 04 Series Datalogging Program Operator’s Manual.
Table 6: Data Logging Capacity
Interval Time
Data Logging Capacity
10 seconds
10 hours
20 seconds
20 hours
30 seconds
30 hours
1 minute
60 hours
3 minutes
180 hours
5 minutes
300 hours
10 minutes
600 hours