8
Disassembly and disposal
8.1 Safety information for disassembly and disposal
WARNING!
Risk of injury in the event of improper disas-
sembly!
Sharp-edged components, tips and corners on the
linear unit or the required tools can cause injury.
– Ensure that there is sufficient space before
starting work.
– Handle exposed components with sharp edges
carefully.
– Ensure that the work area is clean and tidy at all
times! Components and tools lying around or on
top of one another are sources of accidents.
– Disassemble components properly. Observe the
components’ sometimes high net weight. If
necessary, use lifting gear.
– Secure components so that they do not fall
down or topple over.
– Consult with the manufacturer in the event of
uncertainties.
8.2 Disassembly
Before starting disassembly:
n
Physically disconnect the linear unit from the electrical power
supply (if available).
n
Dispose of operating materials in an environmentally friendly
manner.
Then clean the modules and components properly and disas-
semble them, adhering to the applicable local occupational health
and safety and environmental protection regulations.
8.3 Disposal
If no return or disposal agreement was concluded, have disas-
sembled components recycled:
n
Scrap metals.
n
Have plastic components recycled.
n
Dispose of other components sorted by their material composi-
tion.
Improper disassembly
Disassembly and disposal
Disposal
14.10.2021
Linear unit RK MonoLine R/RK MonoLine Z
118
