RK Rose+Krieger RK MonoLine R, Руководство по сборке

Страница: 109 / 132

5.4.4.2 Assembling the inductive limit switch
Version RK MonoLine R, Z
Size 40/60/80/120
Personnel: n Assembly staff
n Qualified electrician
Protective equipment: n Protective clothing
n Protective gloves
n Safety shoes
Prerequisite:
n The electric gear unit and/or motor (if available) are secured
against restarting.
1. Insert and position the slot stones (Fig. 37/1) in the slot of the
guide profile.
2. Place the limit switch (Fig. 37/3) along with a mounting
bracket (Fig. 37/4) at the height of the inserted slot stones.
3. Tighten 2 screws (Fig. 37/2):
Size Screw size Tightening torque [Nm]
40 M4 1.5
60, 80, 120 M4 2
4. Use the hexagon nuts (Fig. 38/1) to set an operating distance
of 2 mm between the inductive limit switch (Fig. 38/2) and the
roller bolt (Fig. 38/3).
5. Have a qualified electrician connect the inductive limit switch
according to the circuit diagram.
ð
The limit switch is assembled and connected.
Applicable to
Assembling the limit switch
Fig. 37: Assembling the limit switch
Adjusting the operating distance
Fig. 38: Adjusting the operating dis-
tance
Connecting the limit switch
Assembly
Assembling optional modules > Assembling the limit switch
14.10.2021 Linear unit RK MonoLine R/RK MonoLine Z 109