RK Rose+Krieger RK MonoLine R, Руководство по сборке

Страница: 106 / 132

3. Place the drive shaft (Fig. 31/2) on the adapter washer
(Fig. 31/1).
4. Tighten 4 screws (Fig. 31/3) alternating diagonally:
Size Screw size Tightening torque [Nm]
40 M4 3
80, 120 M6 15
The drive shaft for the RK MonoLine Z 80
and 120 are connected to the adapter
washer with 8 screws each.
ð
The drive shaft is assembled.
Version RK MonoLine Z
Size 60
Personnel: n Assembly staff
Protective equipment: n Protective clothing
n
Protective gloves
n Safety shoes
Prerequisite:
n The electric gear unit and/or motor (if available) are secured
against restarting.
1. Place the drive shaft (Fig. 32/2) on the timing belt shaft
(Fig. 32/1).
2. Tighten 4 screws (Fig. 32/3) alternating diagonally:
Size Screw size Tightening torque [Nm]
60 M8 25
ð
The drive shaft is assembled.
Assembling the drive shaft
Fig. 31: Assembling the drive shaft
Applicable to
Assembling the drive shaft
Fig. 32: Assembling the drive shaft
Assembly
Assembling optional modules > Assembling the drive shaft
14.10.2021 Linear unit RK MonoLine R/RK MonoLine Z 106