RK Rose+Krieger RK MonoLine R, Руководство по сборке

Страница: 103 / 132

Size Screw size Tightening torque [Nm]
40 M3 1.4
60, 80 M6 10.5
120 M8 25
ð
The synchronisation shaft is assembled.
5.4.2.2 Assembling the synchronisation shaft (with protective tube)
Version RK MonoLine Z
Size 40/60/80/120
Personnel: n Assembly staff
Protective equipment: n Protective clothing
n Protective gloves
n Safety shoes
Prerequisites:
n The electric gear unit and/or motor (if available) are secured
against restarting.
n Linear units to be connected must be fixed in the substrate.
The synchronisation shaft for the RK MonoLine Z
60 and Z 80 does not require the first step because
it is not equipped with an intermediate plate.
1. Place the intermediate plate (Fig. 25/1) on the pulley box
(Fig. 25/2) of both linear units.
2. Tighten 4 screws each (Fig. 25/3), alternating diagonally:
Size Screw size Tightening torque [Nm]
40 M5 4
120 M8 25
Applicable to
Assembling the intermediate plate
Fig. 25: Assembling the intermediate
plate
Assembly
Assembling optional modules > Assembling the synchronisation shaft
14.10.2021 Linear unit RK MonoLine R/RK MonoLine Z 103