RK Rose+Krieger RK MonoLine R, Руководство по сборке

Страница: 97 / 132

2. Ensure that a distance of 300 mm between the clamping bars
(Fig. 14/1) is not exceeded at maximum load.
3. Tighten two screws (Fig. 15/1) for each clamping bar
(Fig. 15/2).
For this, observe the following:
Size A [mm] B [mm] Screw size Tightening
torque [Nm]
40 52 65 M6 10
60 80 100 M8 25
80 100 120 M8 25
120 140 160 M8 25
ð
The linear unit is assembled on the substrate.
5.3.2 Assembling a linear unit with slot stones
Version RK MonoLine R, Z
Size 40/60/80/120
Positioning clamping bars
Fig. 14: Positioning clamping bars
Fixing clamping bars
Fig. 15: Fixing clamping bars
A Distance between fixing holes
B Required space
Applicable to
Assembly
Assembling the linear unit on the substrate > Assembling a linear unit with slot stones
14.10.2021 Linear unit RK MonoLine R/RK MonoLine Z 97