RIX Industries RIX 2V3B-4.1V Series, Инструкция по эксплуатации и перечень запасных частей

Страница: 32 / 79

MAN-2V3B-4.1V REV (B)
21
7.6.3 REPLACE PISTON RING - FLOATING PISTON - 3RD STAGE
Note:
See drawings found in the back of this manual for details of the floating piston assembly.
a. Remove the cylinder head per Section 7.3. Note orientation of suction/discharge ports.
b. Rotate crankshaft by hand until piston is at top of cylinder, then remove piston Note :
Rider ring on piston rod cannot be changed unless the cylinder is removed.
c. Remove cylinder. Inspect condition of cylinder and piston and replace if necessary.
Wear must be within the tolerance specified at end of chapter.
d. Inspect condition of rider ring on end of piston rod.
e. Replace rings, expanders and piston as necessary.
f. Install piston in sleeve tool and insert piston back into cylinder with stubbed end up
toward head.
g. Reinstall the cylinder and head in accordance with instructions.
h. Rotate the flywheel by hand several times to be certain that the parts are free.
Piston ring break-in: None required.