Operating Manual Version 6.3-04 of 10.10.18
29
you start treating a new patient) (item 5.3.2).
6.3.3
Place the electrode on the patient's skin. Wait for several se-
conds to make sure a patient does not have unpleasant sensations. Press
and hold the
‘ ’
button until the first pricking sensation, vibration or for-
mication at the comfortable level.
ATTENTION! To avoid uncomfortable and painful sensations of
a patient,
it is recommended to set the energy to minimum (by
pressing and holding the
‘
’
button until the intermittent audio
signal sounds) before the start of procedure or when going to treat
the most sensitive skin areas.
6.3.4
When the treatment is over, it is recommended to reset to de-
fault settings (refer to item 5.3.2). Switch the SCENAR device off (refer
to item 5.3.5).
7 MAINTENANCE
7.1
The SCENAR device shall be repaired only by the manufacturer.
7.2
In case the low battery level is indicated (short beeps twice a sec),
open the battery compartment cover and replace the battery. It is recommend-
ed to reset the SCENAR device to the default settings in accordance with:
item 5.1.2 for SCENAR Home,
item 5.2.2 for SCENAR Sport,
item 5.3.2 for SCENAR Basic.
