![RITM OKB ZAO SCENAR Basic Скачать руководство пользователя страница 17](http://html1.mh-extra.com/html/ritm-okb-zao/scenar-basic/scenar-basic_operating-manual_1464686017.webp)
Operating Manual Version 6.3-04 of 10.10.18
17
4.2.2
On the front side of the casing there are following indicators:
3
–
‘
’
LED
– indicates the energy level (stimulus strength);
4
–
‘F’
LED
– indicates the stimulation frequency preselecting;
5
–
‘Fm’
LED
– indicates the
F
requency
M
odulation (
‘Fm’
)
mode preselecting;
6
–
‘Am’
LED
– indicates the
A
mplitude
M
odulation (
‘Am’
)
mode preselecting;
7
–
‘D’
LED
– indicates the
D
osing mode preselecting.
The
‘F’, ‘Fm’
,
‘Am’
and
‘D’
LEDs are as well used:
to indicate stimulation energy level (when adjusting the energy);
(optional) to display the levels of initial reactions and the dose
progress in the
Dose 1
mode;
(optional) to display current reaction to the initial reaction ratio
in the
Dose 2
mode.
4.2.3
On the front side of the casing there are following buttons:
8
–
‘ ’
button
– switches the
SCENAR
device
ON
and
OFF
;
9
–
‘ ’
button
– preselects the
desired
stimulation mode;
10
–
‘ ’
button
– activates the preselected mode or increases the
energy level (stimulus strength);
11
–
‘ ’
button
– deactivates the preselected mode or decreases
the energy level (stimulus strength).
4.2.4
On the left side of the casing there is a jack (13) intended for
connecting the add-on electrodes which can be supplied additionally upon
request.
ATTENTION!
Only the add-on electrodes produced by the
SCENAR manufacturer can be used. Be careful: use only plug-
compatible add-on electrodes. Using the incompatible or produced
by the other manufacturer add-on electrodes may result in damag-
ing the jack and making the warranty invalid!
4.2.5
To increase or decrease the energy level (stimulus strength) ei-
ther press the
‘ ’
or
‘ ’
button respectively step by step (1 step = 1 unit)
or press and hold the button (speedy adjustment).
The energy level increase is accompanied by clicks at the adjustment
rate, the increase of the
‘
’
LED brightness and the
‘Fm’
,
‘Am’
and
‘D’
LEDs
lighting up one after another:
‘F’
– from minimal energy to 25 %;
‘F’, ‘Fm’
– from 26 to 50 %;
‘F’, ‘Fm’, ‘Am’
– from 51 to 75 %;
‘F’, ‘Fm’, ‘Am’, ‘D’
– from 76 to 100 %;